NEW BUILDING TORGEM  HULL No. 90

M/T “VARKAN AKDENIZ”

 

OWNER               : VARKAN AKDENIZ GEMI INSA A.S., ISTANBUL - TURKIYE

BUILDER              : TORGEM GEMI INSA VE ONARIM SANAYI A.S., ISTANBUL - TURKIYE

 

VESSEL DESCRIPTION:

 

The vessel is designed as steel constructed, combined framed, double skinned in way of cargo spaces, single-screwed, diesel powered suitable for heavy/light fuel operation, having suitable bow thruster spaces located at fwd, engine room and accommodation spaces located at aft, forecastle deck/spaces located at fwd, suitable for Oil / IMO II type of products.

Cargo tanks are located btw. aft pump front bulkhead and forward cofferdam aft buklhead. These tanks will be coated with epoxy type of paint which is compatible for cargoes listed in the chemical fitness certificate. Additionally, all water ballast tanks will be coated epoxy type of paint.

 

Principle Dimensions:

Length over all (L.O.A.)                                               abt.                          129.50 M

Length between perpendiculars (L.B.P.)                               122.10 M

Breadth (Moulded)                                                                                          19.80 M

Depth    (Moulded)                                                                                           10.40 M

Draft     (Scantling.)                                                       abt.                              8.15 M

Gross Tonnage (International)                                                                   7.350 approx.

Net Tonnage                                                                                                      4.400 approx.

Dead Weight                                                                             11.200 summer approx.

 

TECHNICAL SPECIFICATIONS :

 

ENGINE ROOM :

 

1-MAIN&AUXILIARIES SUPPLIED BY “ENKA”, ISTANBUL TURKEY

ENKA Marketing Imp.Exp.Inc.

Tel : +90 216 446 64 64 pbx

Fax: +90 216 395 13 40

E-mail   :  hakanguveli@enka.com.tr

Web      : www.enka.com.tr

 

MAIN ENGINE :

Type :   HANSHIN LH46LA

Design :              

The engine is vertical inline four stroke, single acting, direct injection, trunk piston, non reversible type with an exhaust turbo-charger and air cooler.

Continuous rating: 3309 kW at 220 rpm, reference conditions to ISO 3046/1:

Sea water temperature                                               : 32 deg. C

Ambient air temperature                                           : 40 deg. C

Atmospheric pressure                                 : 101 kPa

Exhaust back pressure                                 : 2.0 kPa

Fuel consumption                                                         : 177 + 3% MDO having low calorievalue 42700 kj/kg

Lubricating oil consumption                     : 1.1 g/kWh system oil , 0.7 g/kWh  Cylinder oil

 

Exhaust Gas Emission:

This engine is complied with all current regulatory requirements.

IMO SOLAS requirements: 

This engine is complied with the following points ;

Jacketed high pressure fuel pipes,

Leak fuel collecting system with collecting tank and sensor for alarm,

Starting Air System :

2-Air bottle, seperate, 550 lt. each, additionally 2 relief valve and automatic drain valve ,

Fresh Water Cooling System :

1- HT pump, fitted on engine

1- HT stand-by pump, vertically designed, make ALLWEILER , type NISM 65-160 U3.1D W18, 80 cub.m/h at 2.0 bar

1- LT pump, fitted on engine,

1- LT stand-by pump, vertically designed, make ALLWEILER, type NISM 100-250 U3.1D W18, 190 cub.m/h at 2.5 bar

1- LT cooler, seperate, titanium

2- Seawater Cooling Pump, vertically designed, make ALLWEILER, 265 cub.m/h at 2.0 bar

1- HT thermostat, seperate

1- LT thermostat, separate

1- Electronic charge-air temperature control with control valve, seperate, without part loading heating

1- Engine pre-heating equipment, seperate, consisting of electric preheater, switch box and pump.

Heavy Fuel System :

HFO seperators, 2 PCS

2 sets ALFA LAVAL SA 815 Automatic Separation System (*)
Capacity                                                             : 1600 It/h (HFO - 380 cSt/50°C)

Separation System Includes;

-Preheating System,

CBM 26/40, plate heat exchanger, (At = 48°C)

SRV 15/0 Thermal regulating valve,

Safety valve,

Temperature sensor,

Thermometer,

BV Class test certificate for CBM,

-Pump System

-Feed pump and electric motor,

IMO,ACP025N/1700rpm
(Feed pump capacity: 1325 l/h for HFO 380cSt/50°C)

-Separation System

S 815 separator and electric motor (440V, 60Hz)

One set of tools for two separators,

Combined starter for separator and pump,

Ancillary kit;

-Valve block, water

Valve block

Flow valves, 3 pcs

Connection,

Flexible connections,

-Flexible hose

-Oil Ancillary Kit

-Temperature sensor,

3 way valve

Nipples

Flexible hoses

Rectangular rings,

Pressure transmitters,

Regulating valve,

Water tranducer,

Needle valves

EPC 50 control unit and panel,

Sludge out-let kit,

Standard spare part kit for separator

* 2 sets HFO separators will be modulised Alfa Laval Dis. Tic. Ltd. Sti.

1- MDO separator, 1 pcs

 Type                                                    :ALFA LAVAL , MIB303  

1- set of booster module, seperate 

1 pc ALFA LAVAL FCM 1100 TT Booster Module

Module Includes;

-2 pes Supply Pumps, IMO Type : ACE 025 N, 1750 rpm,

-2 pes Circulation Pumps, IMO Type : ACE 025 N, 3500 rpm,

-1 pc Pressure Control, Overflow Valve,

-1 pc Deaerator Arrangement,

-1 off Viscosity Control System Viscochief MKII with heaters,

2 pes Shell and Tube type heaters

1 pc viscosity sensor,

1 pc thermal oil regulating valve

1 pc temperature sensor (2xPt 100)

Fuel Filter, 1 pc Dublex Automatic/Manual Filter,

Starter for filter and pumps,

Flow transducer

Control Tower,

Set Instrumentation

HFO/DO manual changeover valve

Insulation

Electrical heat tracing with flange protection

BV Class Test certificate

 

Lubricating Oil System :

1- Plate cooler, seperate, stainless steel

1- Force pump, fitted on engine

1- Stand-by pump, vertically designed, ALLWEILER  type SNS 940 ER 46 U12.1 W1 DS 44A, 68 cub.m/h at 4.5 bar

1- LUBEOIL seperator, 1 pcs

Type                                                                     : ALFA LAVAL,  PA 615

Viscosity                                                            : 55 cST at 100 deg.C (600 cST at 50 deg.C)

Capasity                                                             : 1450 lt/h (LO- Trunk Detergent/SAE40)

 

PROPULSION SYSTEM:

BERG PROPULSION INTERNATIONAL PTE LTD

 

Gear Box :

REINTJES.

Type                                                                    : SVA 900

Reduction Ratio                                             : abt. 2.028 : 1

Type                                                                    : Not Clutchable

Offset Type                                                      : Vertical. Abt 900 mm.

Application Range                                         : Continuous operation / heavy duty

Pump                                                                  : Integrated pump

Oil Cooler                                                         : Max. Inlet temp. 38 deg.C

Stand-by pump                                               : Fitted onto gearbox.

Oil Filter                                                            : Twin Oil Filter with electrical clogging indicator

Thrust Bearing                                 : Integrated thrust bearing

 

CPP Arrangements :

Berg Propulsıon

CPP Model :

Type                                                                    : BCP 1140 HDX-6000

Hub Type                                                           : BCP 1140

OD Box                                                : HDX 6000

Hub Diameter                                  : 850 mm.

Number of Blades                                         : 4

Propeller Diameter                                      : 4800 mm.

Material                                                             : Cu Ni Al Bronze

 

Hydraulic SYSTEM :

Seperate hydraulic power pack unit provided as mentioned below,

PUMP TYPE                                                        : T6H29D-03

MOTOR TYPE                                                     : VEM 3 ph 4 pole

CALCULETED PRESSURE                                : 38 BAR

WORKING PRESSURE                     : 45 BAR

Shaft Line                                                          :

Tailshaft length                                              : 6592 mm.

Diameter                                                           : 460/355/350 mm

Hollow Bore                                                     : DIA 130 mm

 

Seamless Stern Tube : 

Length                                                : 3650 mm

Type                                                                    : Oil Lubricated

Material                                                             : Carbon Steel C37

 

Bearings and Seals :

Aft Seal                                                              : IHC Supreme, SC2B 500

Forward Seal                                                    : IHC Supreme, SC2Z 380

Aft Bearing                                                       : White metal

Forward Bearing                                             : White metal

Temp. Control                                 : Double PT100 sensor at aft bearing

Oil Tank                                                             : Gravity tank with oil level sensor

 

Remote Control :

Main functions:

Pitch and rpm control with combinator

Overload Protection

Emergency Control

Backup Control System

 

Stations:

1 Control panel in W / H

1 Local

1 Panel for ECR

 

Shaft Attached Alternator :

Make AVK, DSG 86K1-8

                   900 Kva, 720 Kw, 440 VAC, 60 Hz, 900 Rpm.

Main Starting Air Compressor :

Atlas Copco ketting marıne center B.V. (ıjmuıden – NLD)

Fill-up Capacity at 1500 rap        : 33,41 cub.m/h

Operation pressure                                      : 30 bar

Speed                                                                  : 1745 rpm

Stages / Cylinder                                            : 2 / 2

Cooling Medium                                            : Air

Drive                                                                    : Direct drive

Ambient Temperature                 : Up to 45 deg.C

 

Oily Water Seperating & Alarm Equipment :   

Make Recovered Energy, Inc.

Oil Filtering Equipment :

Type                                                                    : BOSS 107 SEPARATOR SYSTEM

Capacity                                                             : 2,5 cub.m/h

Type                                                                    : BOSS 11T 107 , 15 ppm separator

Sewage Treatment Plant :

Make Hamann AG

Total for 20 persons.

Type                                                                    : 01m3/ Mini Compact CS 20

Hydraulic Load                                : 24 cub.m / day

Organic Load                                     : 18 kg / day

 

Fresh Water generator :

1 set ALFA LAVAL JWP-26-C80 Fresh Water Generator

Capacity                              : 15,0m3/24h     ( 80,0 ° C Jacket Water Temp, 31,9 m3/h Jacket Water

flow rate and 451 kW jacket water heat, 32 ° C sea water temp.)

Equipments of the system;

Generator ve main equipments,

Titanium condensor ve evoporation plates,

Ejector pump and electric motor,

Fresh water pump and electric motor,

Control panel with motor starters and salinometer,

Feed water treatment,

Re-hardening filter, Type: CUNO 1M1-FC, Capacity: 0,3 m3/h

UV-Sterilizer, Type: UVK-1, Capacity: 0,5-3,0 0,3 m3/h

 

2- AUXILIARIES SUPPLIED BY “CANKA” ISTANBUL – TURKEY

CANKA DENİZCİLİK VE TİC. LTD.,

Koşuyolu, Muhittin Üstündağ Cad. Ali Nazım Sk. 11/2 

Kadıköy, Istanbul – Türkiye

Tel.        : 90 216 340 55 60

Faks       : 90 216 340 30 05

E-mail   : canka@cankaltd.com

 

Auxiliary Generating Sets :

Make Lindenberg-Anlagen Gmbh

3 Set of Marine Diesel Generator

Diesel Type at %100                                      : MAN D 2840 LE 301,515 kW at 1800 rpm, 223 g/hWh

Generator Type                                               : Leroy Somer, type LSAM 49.1 S4

Capacity                                                             : 482 kW, 602,5 kVA

Current                                                               : 3 x 440 VAC

Cycle                                                                   : 60 Hz

Revolution                                                        : 1800 rpm

Emergency Generating Set :

Make Lindenberg-Anlagen Gmbh

1 Set of Marine Diesel Generator

Diesel Type       at 100%                                : MAN D 2866 LXE 20, 200 kW at 1800 rpm, 205 g/hWh Generator Type                                 : Leroy Somer, type LSAM 46.2 M 3

Capacity                                                             : 150 kW, 187,5 kVA

Current                                                               : 3 x 440 VAC

Cycle                                                                   : 60 Hz

Revolution                                                        : 1800 rpm

 

Tank Cleaning Equipment:

Make SCANJET Marine AB

26 pcs. Fixed type SCANJET SC 30 TL, single nozzle, size 10 mm. dia., 10 cub.m/h at 10 bar.

2 pcs.    Portable type SCANJET SC 15 TW, twin nozzle, size 2x9 mm. dia., 15 cub.m/h at 10 bar.

 

Deepwell Cargo Discharging Pumps :

Make MARFLEX BV –NETHERLAND

Main Cargo Pumps :

12 pieces of MarFlex electrically driven cargo discharge pumps provided.

Type                                                                     : MDPD-100, single stage centrifugal pump

Capacity                                                             : 250 cub.m/h, at 110 m.l.c.

Specific gravity                                                : 0.8 at 20 deg.C

Viscosity                                                            : 1.0 cST at 20 deg.C

Design speed                                   : 3597 rpm,

Max. speed                                                       : 3600 rpm,

Required Power                                              : 82 kW

Prime mover                                                    : Electric motor, 105kW, 163.1 A, 60 Hz

2 piece of MarFlex electrically driven slop discharge pump provided.

Type                                                                     : MDPD-80, single stage centrifugal pump

Capacity                                                             : 80 cub.m/h, at 110 m.l.c.

Specific gravity                                                : 0.8 at 20 deg.C

Viscosity                                                            : 1.0 cST at 20 deg.C

Design speed                                   : 3290 rpm,

Max. speed                                                       : 3600 rpm,

Required Power                                              : 31 kW

Prime mover                                                    : Electric motor, 45kW, 81 A, 50 Hz

1 piece of MarFlex hydraulically driven submersible pump&auxiliaries provided

Type                                                                     : MSP-80C, single stage centrifugal pump

Capacity                                                             : 70 cub.m/h, at 65 m.l.c.

Specific gravity                                                : 1.0 at 20 deg.C

Viscosity                                                            : 1.0 cST at 20 deg.C

Hyd. Power Consumption                           : 27 kW max.

Hyd. Working Pressure                                : 280 bar

1- set off extension hoses                          : 25 m. (for connection)

1- set off chem. Resist. Hoses   : 15 m., dia. 4 inches,

1- set off tripod                                               : 500 kg. SWL 

 

Speed Control for Electrically Driven Pumps :

Frequency converter system for variable speed control provided.

Total amount of F/C                                                      : 6 pieces

Ttotal amount of pumps driven by F/C                 : 14

Maximum output & system requirements         : Suitable to drive 4 cargo/slop pumps simultaneously

Cooling                                                                                              : Air

Power&Speed Control for Hydraulically Driven Pump :

Hydraulic power pack unit provided for power&speed control.

Type                                                                    : Electromotor driven hydraulic power pack

Capacity                                                             : 72 lt/min.

Working pressure                                          : 280 bar

Maximum pressure                                      : 280 bar

Return pressure                                             : Atmosferic

Ambient Temp                                : 45 deg.C max.

Oil tank capacity                                            : 400lt.

Pump type                                                        : Rexroth, A10VSO 45

Power                                                                 : 440 VAC, 57 A.

 

3- AUXILIARIES SUPPLIED BY “YEDI DENIZ” ISTANBUL - TURKEY                

YEDI DENIZ, Turizm Denizcilik Ticaret Sanayi ve Taşımacılık A.Ş., Istanbul – Türkiye

Yedi Deniz Building, Setüstü, İzzetpaşa Sk. No1

TR-80040 Kabataş. – Istanbul - Türkiye

Tel.        : 90 212 251 64 10

Faks       : 90 212 251 05 75

E.mail   : yedideniz@yahoo.com

 

Auxiliary Pumps :

Make ALLWEILER AG,

Ballast Pumps 2 units

 Model                                                                :NT150-250U3.1DW3IEC200L-4
Capacity                                                             :400m3/h
Discharge Pressure                                       :2.50 Bar
Casing material                                               :NiAl Br Bronze
Impeller material                                          :NiAl Br Bronze
Shaft material                                                 :1.4571       St.St.
Voltage                                                              :3 x 440-60 V

Tank Cleaning Pump: 1 unit

Model                                                               :NISM 65-250 U3.1D W3 IEC 200 L-2
Capacity                                                           :80 m3/h
Discharge Pressure                                     :9.00 Bar
Casing material                                            :NiAl Br Bronze
Impeller material                                        :NiAl Br Bronze.
Shaft material                                               :1.4571       St.St.
Voltage                                                            :3 x 440-60 V

Emergency Fire pump  1 unit
Model                                                               :NISM 80-200 U3.1 W3 A25A IEC 200L-2
Capacity                                                           :80 m3/h
Discharge Pressure                                     :7.00 Bar
Casing material                                            :NiAl Br    Bronze
Impeller material                                        :NiAl Br    Bronze
Shaft material                                               :1.4571       St.St.
Voltage                                                            :3 x 440-60 V

Foam/Fire pump 1 unit
Model                                                               :NAM-F 125-250 U3.1D W3 A25A IEC 315 M-2
Capacity                                                           :260 m3/h
Discharge Pressure                                     :9.00 Bar
Casing material                                            :NiAl Br Bronze
Impeller materiall                                       :NiAl Br  Bronze
Shaft material                                               :1.4571       St.St.
Voltage                                                            :3 x 440-60 V

Fire/Bilge pump  1 unit
Model                                                               :NISM 80-200 U3.1D W3 A25A IEC 225 M-2
Capacity                                                           :300 m3/h
Discharge Pressure                                     :7.00 Bar
Casing material                                            :NiAl Br    Bronze
Impeller material                                        :NiAl Br   Bronze
Shaft material                                               :1.4571       St.St.
Voltage                                                            :3 x 440-60 V

Bilge/Aux. Pump  1 unit
Model                                                               :NISM 60-160 U3.1C V3 A25A IEC 160 M-2

Capacity                                                           :100 m3/h
Discharge Pressure                                     :2.50 Bar
Casing material                                            :NiAl Br Bronze
Impeller materiall                                       :NiAl Br Bronze
Shaft material                                               :1.4571       St.St.
Voltage                                                            :3 x 440-60 V

M/E  SW Pumps 2 units
Model                                                               :NISM 125-250 U3.1D W3 IEC 180 L-4
Capacity                                                           :265.20m3/h
Discharge Pressure                                     :2.00 Bar
Casing materiall                                           :NiAl Br Bronze
Impeller material                                        :NiAl Br Bronze
Shaft material                                               :1.4571       St.St.
Voltage                                                            :3 x 440-60 V

 

Aux. SW pump 1 unit

Model                                                               :NISM 100-250 U3.1D W3 IEC 180 M-4
Capacity                                                           :190 m3/h
Discharge Pressure                                     :2.50 Bar
Casing material                                            :NiAl Br Bronze
Impeller material                                        :NiAl Br Bronze
Shaft material                                               :1.4571       St.St.
Voltage                                                            :3 x 440-60 V

ME LT FW Pumps 2 units

Model                                                               :NISM 100-250 U3.1D W18 IEC 180 M-4
Capacity                                                           :190 m3/h
Discharge Pressure                                     :2.50 Bar
Casing material                                            :GG-25 Castiron
Impeller material                                        :NiAl Br Bronze
Shaft material                                               :1.4571       St.St.
Voltage                                                            :3 x 440-60 V

ME HT FW Pumps  2 units

Model                                                               :NISM 65-160 U3.1D W18 IEC 132 S-2
Capacity                                                           :80 m3/h
Discharge Pressure                                     :2  Bar
Casing materiall                                           :GG-25 Castiron
Impeller material                                        :NiAl Br Bronze
Shaft material                                               :1.4571       St.St.
Voltage                                                            :3 x 440-60 V

 

Aux.FW Pumps  2 units

Model                                                               :NISM 50-160 U3.1D W18 IEC 132 S-2

Capacity                                                           :60 m3/h
Discharge Pressure                                     :3.50  Bar
Casing material                                            :GG-25 Castiron
Impeller material                                        :NiAl Br Bronze
Shaft material                                               :1.4571       St.St.
Voltage                                                            :3 x 440-60 V

 

ME LO Pump St.By 1 unit
Model                                                               :SNS 940 ER 46 U12.1 W1 DS 44A IEC 160 ML-4
Capacity                                                           :68 m3/h
Discharge Pressure                                     :4.50  Bar
Casing material                                            :GG-25 Castiron
Liner material                                               :GG-25 Castiron
Shaft material                                               :Hardened Steel
Voltage                                                            :3 x 440-60 V

FO Transfer Pumps 2 units
Model                                                               :TRL 210 ER 40 W117 IEC 100 L-4
Capacity                                                           :12 m3/h
Discharge Pressure                                     :4  Bar
Casing material                                            :GGG-40 Nodular Castiron
Shaft material                                               :Hardened Steel
Voltage                                                            :3 x 440-60 V

 

DO Transfer Pumps 1 unit
Model                                                               :TRL 80 ER 46 W117 IEC 90 L-2
Capacity                                                           :11 m3/h
Discharge Pressure                                     :4  Bar
Casing material                                            :GGG-40 Nodular Castiron
Shaft material                                               :Hardened Steel
Voltage                                                            :3 x 440-60 V

Sludge Pump 1 unit
Model                                                               :AEB 1E 200 H11.P01-112.PP.5846 IEC 100 L-4/SK25
Capacity                                                           :10 m3/h
Discharge Pressure                                     :4  Bar
Casing material                                            :GG-25  Castiron
Liner material                                               :Perbunan Elastomer
Shaft material                                               :1.4571 Steel
Voltage                                                            :3 x 440-60 V

 

Bilge Collector Pump 1 unit
Model                                                               :GS-25 S.W. IEC 90 S-4
Capacity                                                           :2.5 m3/h
Discharge Pressure                                     :2  Bar
Casing material                                            :GG-25 Castiron
Cylinder                                                           :Bronze
Piston                                                               :Simrit Synt.Ruber
Voltage                                                            :3 x 440-60 V

 

Sewage Pump 1 unit
Model                                                               :AEB 1E 100 H11.P01-112.PP.5846 IEC 90 L-4/SK01
Capacity                                                           :5 m3/h
Discharge Pressure                                     :4  Bar
Casing material                                            :GG-25  Castiron
Liner material                                               :Perbunan Elastomer
Shaft material                                               :1.4571 Steel
Voltage                                                            :3 x 440-60 V

 

Cargo Draim Pump(Yamada air-driven diaphrahm pump) 1 unit

Model                                                               :NDP 25 BSC
Capacity                                                           :5 m3/h

Discharge Pressure                                     :3  Bar
Casing material                                            :AISI 316 St.Steel 
Diaphrahm                                                     :Neoprene

 

Tank Level Gauging System :

Make ARISTON  Norway,

The Surveyor™ Independent High & High High Level (overfill) Alarm System includes:

 

14 Cargo & Slop tanks

1 Independent High & High High level alarm switch for each tanks

 

Cargo Control Room

1 Cabinet including 2 x TDU, 2 TCU and Zener barriers

 

Deck

2 External flash-lights (one red, one amber) 1 External horn (sounder)

 

The Surveyor™ tank monitoring system includes:

Level, temperature and tank pressure gauging in 14 cargo & slop tanks

Level, temperature and tank pressure gauging in 1 Residual tank

Level gauging in 14 ballast tanks

Level gauging in 8 HFO, 4 DO, 4 FW and 8 service tanks

Pressure gauging on 14 cargo line pressure

Draft gauging in 2 points

14 Cargo & Slop tanks

2 Temperature sensors (each tank)

1 Tank pressure sensor (each tank)

1 Radar (each tank)

1 Independent High & High High level alarm switch (each tank)

1 Residual tank

1 Level pressure sensor (each tank) 1 Tank pressure sensor (each tank)

1 Temperature sensor (each tank)

 

14 Ballast water tanks

14 level sensor arrangement for outside tank installation

 

8 HFO tanks

8 level sensor arrangement for outside tank installation

 

4 DO tanks

4 level sensor arrangement for outside tank installation

 

4 FW tanks

4 level sensor arrangement for outside tank installation

 

8 Service tanks

8 level sensor arrangement for outside tank installation

 

14 Cargo line pressure

14 pressure sensor arrangement for pipe installation

 

2 Draft

2 level sensors for draft readings

 

4- AUXILIARIES SUPPLIED BY “DAPE MUMESSILLIK” ISTANBUL - TURKEY                               

DAPE Mümessillik
Batı Mah. Ankara Cad. No.57 A Blok D.2
34890 Pendik - İstanbul
Tel      : +90 216 491 51 37 - 38
Faks   : +90 216 491 51 36
Gsm   : +90 536 386 16 06
E-mail : info@dape.com.tr 
Web    : www.dape.com.tr

 

Thermal Oil Heater, Exhaust Gas Boiler & Other Heating Appliances :

Make HTI GESAB, Hoch-Temperatur Industrieanlagen Gmbh.

 

Thermal Oil Heaters :

Type HTI-GESAB HE 17 V 50  are designed as a radiating boiler with a succeeding convector heating surface and constructed as a three-pass flue gas system. These heaters will be used for cargo heating operations,

                 

Heating capacity                                             ; 2000 kW, 75 m3/h

Addm. Operating temperature                ; 300 deg.C

Flow temperature                                         ; 260 deg.C

Return flow temperature                           ; 210 deg.C (abt.)

Circulating quantity                                      ; 63,4 m3/h

Heating surface                                              ; 75,7 sq.m

Medium                                                             ; heat carrying oil

Operation overpressure                             ; 10 bars

 

Oil burner unit;

Make                                                                   ; Weishaupt

Type                                                                    ; RMS 9

Type of fuel                                                      ; IFO 380 / Gas oil

Full load                                                             ; 99 kg/h for gas oil & 104 kg/h for heavy oil

 

Circulating pumps to be used for oil fired heater;

Make                                                                   ; Allweiler

Type                                                                    ; NBT 50 – 200 (3pcs)

Max. operating temp.                  ; 350 deg.C

Feed capacity                                   ; 75 cub.m/h

Pumping head                                 ; 82 m.l.c.

Medium                                                             ; Thermal oil

Speed                                                                 ; 3500 rpm

 

Circulating pumps to be used for fuel oil heating system;

Make                                                                   ; Allweiler

Type                                                                    ; NIT 32-160/01 (2 pcs)

Max. operating temp.                  ; 350 deg.C

Feed capacity                                   ; 30 cub.m/h

Pumping head                                 ; 46 m.l.c.

Medium                                                             ; Thermal oil

Speed                                                                 ; 3500 rpm

 

Exhaust Gas Boiler :

Verticaly designed, type HTI GESAB – AHE 065 V 50, consisted several cylindrical coils fitted coaxially.

Heat capacity                                                   ; 800 kW,  30 cub.m/h

Flue gas input temp.                                    ; 321 deg.C at 90% MCR

Flue gas output temp.                                 ; 246 deg.C at 90% MCR

Operating temp.                                                            ; 250 deg.C

Operating overpressure                                             ; 10 bar

 

Butterworth Heater :

Type HTI GESAB for tank cleaning operations.

Capacity                                                             ; 2000 Kw (2 pcs)

Heating Medium, shell side      ; Thermal oil

Thermal oil temp. inlet / outlet              ; 300 / 210 deg.C

Thermal oil flow                                             ; 72 cub.m/h

Water flow                                                        ; 25 cub.m/h

Water temp.                                                    ; 10 / 80 deg.C

 

Heat Exchanger for Primary / Secondary System :

The secondary system is used for heating of cargo tanks and slop tanks.

Heating medium                                            ; hot water and design for max. 180 deg.C,.

HTI GESAB tube bundle type.

Design                                                 ; Tube bundle type

Capacity                                                             ; 3000 kW

Thermal oil temp. primary side               ; 300/210 deg.C (shell side – inlet/outlet temps.)

Thermal oil temp. secondary side          ; 140/180 for thermal oil & 100/140 for hot water(Tube side).

                                                                                               

Circulating pump for secondary system to be used:

Maker                                                                  ; Allweiler

type                                                                     ; NTWH 32-160/01 (2 PCS)

Type                                                                    ; Hot water pump

Capacity                                                             ; 27 cub.m/h

Head                                                                    ; 55 m.l.c

 

Steam Generator :

The steam generator HTI GESAB type for steaming of cargo tanks to remove odor and salt residues,

Design                                                 ; Horizontal

Capacity                                                             ; 1500 kg/h, 1110 kW

Working pressure                                          ; 4-5 bar

Thermal oil inlet / outlet temp.              ; 260 / 210 deg.C

 

5- AUXILIARIES SUPPLIED BY “TATCO” ISTANBUL - TURKEY                         

 

BERG • ARMATUREN • STEUERUNGEN GmbH

Handelshof 32a

28816 Stuhr - Seckenhausen

GERMANY

 

BALAST SYSTEM

1 x DN 65 - wafer type     PN10

material: GGG40 /St.St./ AlBZ / NB                                                                       

4 x DN80 - wafer type     PN10

material: GGG40 /St.St./ AlBZ / NB                                                                       

1 x DN 100 - wafer type     PN10

material: GGG40 /St.St./ AlBZ / NB                                                                       

3 x DN125 - wafer type     PN10

material: GGG40 /St.St./ AlBZ / NB                                                                       

1 x DN125 - Flanged type     PN10

material: GGG40 /St.St./ AlBZ / NB                                                                       

with B.V. Test  

12 x DN150 - wafer type     PN10

                               material: GGG40 /St.St./ AlBZ / NB

10 x DN200 - wafer type     PN10

                               material: GGG40 /St.St./ AlBZ / NB        

1 x DN300 - wafer type     PN10

                               material: GGG40 /St.St./ AlBZ / NB        

ACTUATOR TYPE : HRA X with

HRA 42,5 – 30 / D.V3

dry mounted ( 130Nm at 100bar )

hydraulic pressure: 105 – 135bar

with    Co – Block 04

1x double check valve

2x pipe connection – steel

2x quick coupling – steel            

 

CARGO SYSTEM

4 x DN100 - wafer type     PN10 with

material: AISI 316 / AISI 316 / PTFE         HRA 42,5 - 40 / D.V0

                OPEN DECK

( 230Nm at 100bar )
with BV - test    hydraulic pressure

                with    Co - Block 03

1x double check valve

2x safety valves

2x pipe connection - st.st.

2x quick coupling - st.st.

24 x DN150 - wafer type     PN10               with

material: AISI 316 / AISI 316 / PTFE         HRA 42,5 - 40 / D.V0

                OPEN DECK

( 230Nm at 100bar )
with BV - test    hydraulic pressure

                with    Co - Block 03

1x double check valve

2x safety valves

2x pipe connection - st.st.

2x quick coupling - st.st.

                                                                                                             

Solenoid valve cabinet , type SVC 3.2
for open / close control

61 x  4/2 way solenoid valves, 2 coils – 24V, DC pulse control
61 x fix throttles for closing speed reduction
61 x VPI/P for open/close indication, 24 V DC 0,1A

1 x high pressure inlet filter,
1 x pressure gauge
1 x main switch

  440V AC 60 Hz power supply    - 3 phase

 

Hydraulic power unit type 60 / 20
60l hydraulic oil tank     1 x 20l accumulator
 2 x el. Pumps, 3.3l/min               1 x hand pump,
 1 x low level-switch,     1 x low pressure-switch,
 1 x pressure switch 2 point
 1 x safety-valve,                            1 x return flow filter – magnetic,
 1 x pressure gauge        1 x common alarm output
 1 x flow leakage indicator

Starter-Box with control devices

  440V AC 60 Hz power supply    - 3 phase

Control desk, floor mounted , piano type

2 x mimic diagram for Cargo and Ballast valves
with:
54 x switches for valve operation;
54 x 2 LED red / green position indication

  1 x remote device control for hydraulic power unit,
  1 x lamp test

230 VAC power supply 1 phase

 

6- AUXILIARIES SUPPLIED BY “ELKON” ISTANBUL - TURKEY

ELKON Elektrik Sanayi ve Ticaret Ltd. Şti.,

Rauf Orbay Cad. No.31

TR-34944 Tuzla – Istanbul – Turkey

Tel.        : 90 216 395 66 95

Faks       : 90 216 446 23 30

E.mail   : info@elkonelk.com

 

Shipboard Use Electrical Arrangements :

   Main switchboard,

   Emergency switchboard,

   Shore connection box,

   Electric distribution panels (440VAC-230VAC-24VDC)

   Electric motor starter boxes,

   Control console in engine control room,

   Control consoles in navigating bridge,

   Control consoles in cargo control room,

   Transformers,

   Charging units (rectifiers),

   Test and emergency stop panels,

   Engine room signal system,

   Bridge general alarm, dead man alarm system and nautical alarm panels,

   Alarm monitoring system, Lyngsoe Marine type UMS2100,

 

 

7- AUXILIARIES SUPPLIED BY “GÜRDESAN” ISTANBUL - TURKEY

GÜRDESAN, Gemi Makineleri San. ve Tic. Ltd. Şti.,

Tavsanlı Kadıyeri Mevkii 2.Bolge

TR – 41410 Gebze – Kocaeli - Türkiye 

Tel.        : 90 262 724 85 46

Faks       : 90 262 724 85 54

E.mail   : gurdesan@superonline.com

 

Anchor windlass & mooring winch (combined), type GD.AW-8101.AP ;

The cable lifters are made of cast steel, type GS 52.3 and fitted with bronze sliding bearings, mounted on the main shaft.

The cable lifters are de-clutchable and stopped by means of using the friction lined bandbrake.

Chain type                                                        : ISO 1704

Chain quality                                                    : Q3

Chain diameter                                               : 50 mm

Nominal force                                 : 116,47 kN

Break out force (2 min.)                              : 174,71 kN

Brake holding force 45 %                            : 882,63 kN

Nominal chain speed                   : 0-11 m/min.

Brake type                                                        : Friction lined brandbrake

Brake control                                                   : Manual operated

Clutch type                                                       : Claw clutch

Clutch operation                                            : Manual operated

Material cable lifter                                      : Cast steel

 

The mooring drum(s) is of a steel welded construction and runs on a bronze sliding bearing. It is de-clutchable and can be stopped by means of friction lined bandbrake. The wire will be connected to the drum by means of clips or a key.

Diameter of drum (Active)         : 640 mm

Width of drum (Active)                               : 480 mm

Diameter of drum (Passive)      : 400 mm

Width of drum (Passive)                             : 576 mm

Wire connection                                            : top

Nominal force (Nom. Speed)    : 100 kN

Nom. rope speed                                           : 0 – 12 m/min.

Light line rope speed                   : 0 – 45 m/min.

Drum brake holding for 1.st layer : 275 kN

Rope diameter                                                : ø 48 mm

Rope length                                                     : 220 m

Brake type                                                        : Friction lined brake

Brake operation                                             : Manual operated

Clutch type                                                       : Claw clutch

Clutch operation                                            : Manual operated

 

The warping end(s) is (are) made of cast iron and is (are) mounted on the shaft. The torque connection is made by means of a key.

Diameter                                                           : 500 mm

Length                                                 : 540 mm

Working diameter                                         : ~ 548 mm

Material                                                             : cast iron

Nominal Force                                                : 100 kN

Nom. rope speed                                           : 0 – 12 m/min.

Light line rope speed                   : 0 – 45 m/min.

 

The Windlass is powered by the GD.HPP - 2 x E_/F Hydraulic Power Pack unit.

 

Chain stopper, type GD.ZS-50 :

Holding force of chain stopper is 80 % of chain breaking strength. The roller chain stopper is of a steel welded construction and runs on a bronze sliding bearing..

 

Mooring winch & hyd. Arrangement, type GD.MW-6001.AP :

The winch foundation is of a steel welded construction. The winch is bolted down on the foundation.

The main shaft is fitted with roller bearings and tightened by means of radial sealing rings. Other shafts are fitted with roller bearings. Tooth wheels are made of cast steel or normal steel and are running in an oil bath.

The drum(s) is of a steel welded construction and runs on a bronze sliding bearing. It is declutchable and can be stopped by means of friction lined bandbrake. The wire will be connected to the drum by means of clips or a key.

Diameter of drum (Active)                         : 400 mm

Width of drum (Active)                                               : 480 mm

Diameter of drum (Passive)                      : 400 mm

Width of drum (Passive)                                             : 580 mm

Wire connection                                                            : top

Nominal force ( 1st Layer )                         : 100 kN

Nom. rope speed                                                           : 0 – 12 m/min.

Light line rope speed                                   : 0 – 45 m/min.

Drum brake holding force 1 st layer       : 275 kN

Rope diameter                                                                : ø 48 mm

Rope length                                                                     : 220 m

Max. Rope layer (s) (Active)                      : 3

Max. Rope layer (s) (Passive)                    : 8

Security winding (s)                                                      : 3

Brake type                                                                        : Friction lined brake

Brake operation                                                             : Manual operated

Clutch type                                                                       : Claw clutch

Clutch operation                                                            : Manual operated

 

The warping end(s) is (are) made of cast iron and is (are) mounted on the shaft. The torque connection is made by means of a key.

Diameter                                                           : 380 mm

Length                                                 : 400 mm

Working diameter                                         : ~ 428 mm

Nominal Force                                                : 100 kN

Nom. rope speed                                           : 0 – 12 m/min.

Light line rope speed                   : 0 – 45 m/min.

Material                                                             : Cast iron

The Winch is powered by the GD.HPP 2 x EX / FX + 1XE25/F49 + 2X50LT  .

 

Hose crane, Swl. 2,0 ton, type GD.HK-20/12 :

The crane is controlled from an open platform above the slewing ring. Entrance to the platform by ladder.

All speeds are proportional from 0 to max. Two motions can be operated at the same time with full capacity, but with reduced speed.

Swl.                                                                                      : 2 t.

Max. Outreach                                                                : 12 m

Min. Outreach                                                 : 2,4 m

Hook Travel                                                                      : 40 m

Hook Speed                                                                      : 10 m/ min.

Slewing Sector                                                                : endless

Slewing Speed                                                                : 1 rpm

Heel / Trim                                                                       : 5 / 2 deg.

Luffting time (average up / down)         : 40 scnds. (approx.)

Hydraulic Power Consumption:

Working Pressure                                          : 240 bar

Maximum Pressure                                       : 280 bar

Working Flow                                   : 60 lt/min.

 

Davit for free fall life boat & hyd. Arrangement, type GD.FFD-20 :

System is designed with two hydraulic cylinders for launching and recovering the boat with power according to SOLAS Regulations and tested.

SWL Hoisting                                                    : 4990 kg

SWL Lowering                                  : 4990 kg

Hoisting speed                                                : 5m/min

Lowering speed                                              : 5m/min

Design spec                                                      : 10° Trim, 20° List simultaneously

Main mean of evacuation                          : Free Fall (10° / 20° )

Secondary mean of evacuation               : Lowering by winch (2° / 5° )

Wire Diameter                                : 16 mm (minimum breaking load >147 kN)

Length of wire                                 : 50 m Free fall is for 20 persons.

                              

Rubber blade (complete set), type GD.ADXH-430/15 :

 

Rudder Blade fabricated from certified steel.

Internal horizontal and vertical webs and a upper and lower vane plate.

Stainless steel drain plugs are fitted to the top and bottom of the rudder.

Rudder connected to the stock by an hydraulic taper coupling, which is part of the blade fabrication.

Rudder Stock fabricated from certified steel to classification requirements.

Machined to suit the rudder carrier / steering gear.

Top of the stock is drilled and tapped for an eyebolt.

Lower end of the stock has a taper and hydraulic nut for fixing to the rudder.

Stainless steel liner on rudder stock. ( bearing areas )

Rudder Trunk fabricated from certified steel.

Complete with lower plate and webs for welding to the ships structure.

Trunk also contains a grease lubricated neck bearing made of bronze.

     Lip-seal arrangement at top of trunk to prevent ingress of water or particles.

     Double lip-seal arrangement to prevent ingress of sea water to stock and trunk.

     Lower seal arrangement for sealing between seal ring and rudder.

               

Accomodation ladder (aliminum), complete set, type GD.OBM-A.225.10 :

Accommodation ladders complete with rotating platform, coupling and davit-arm for hoisting and lowering, including winch for manual or motorised operation.

Accommodation ladder with welded, rounded steps, folding side stanchions and a continuous hand-rail.

Roller block, complete with wire rollers for hoisting wire,

The wire sheaves are provided with heavy duty bronze bearings on stainless steel axles.

Equipped with folding type of rail / stanchions and manrope, handrail made of light alloy tube, equipped with fixed curved steps, all necessary fittings, including lower-platform fending roller, fending beam and quai-roller.

Length                                                                : 10.000 mm

Inside width                                                     : 600 mm

Material                                                             : Aluminium

 

Davit for life raft (with pressure tube), type GD.RRS-21/4,0 :

 

SWL 1,5 – 7,5m RESCUE BOAT :

SWL                                                                      : 1500 kg

Max. working radius                      : 7,5 m

Lifting speed with full load                        : 18 m/min

Lowering speed with full load : 50 m / mm

Slewing speed continuos                           : 1,0 rpm

Lifting height                                                   : min 25 m

List                                                                       : 20°

Trim                                                                     : 10°

 

SWL 2,1 – 7,5 m LIFE-RAFT :

SWL                                                                      : 2100 kg

Max. working radius                      : 7,5 m

Lifting speed with full load                        : 18 m/min

Lowering speed with full load : 50 m/min

Slewing speed continuos                           : 1,0 rpm

Lifting height                                                   : min 25 m

List                                                                       : 20°

Trim                                                                     : 10°

 

SWL 2,0 to – 8,0 m PROVISION :

SWL                                                                      : 2000 kg ( two riging )

Max. working radius                      : 8,0 m

Lifting speed with full load                        : 15 m/min

Lowering speed with full load : 15 m/min

Slewing speed                                 : 1,0 rpm

Lifting height                                                   : min. 25 m

 

7- AUXILIARIES SUPPLIED BY “DAPE MUMESSILLIK” ISTANBUL - TURKEY

DAPE Mümessillik
Batı Mah. Ankara Cad. No.57 A Blok D.2
34890 Pendik - İstanbul
Tel      : +90 216 491 51 37 - 38
Faks   : +90 216 491 51 36
Gsm   : +90 536 386 16 06
E-mail : info@dape.com.tr 
Web    : www.dape.com.tr

 

Gas Monitoring, Alarm System :

MARTEK type MM5001 analyzing unit & control cabinet combined.

Control unit, MM5001, with common alarm and fault indications as well as text display for individual indication onboard.

Analyzing unit, with internal / external measuring points, transport / measuring pump, vacuum / pressure guards and flow meter, built in test gas, common failure, warning and alarm relay outputs.

 

Fire Alarm Control System :

Make POLIMAR, MARINE ENGINEERING

 

Emergency Engine Order System :

Make INELTEH d.o.o., Rijeka, Crotia

Transmitter type EET-Tx, in wheel house

Receiver type EET-Rx, in engine room

 

Electrical Switches & Sockets & Searchlights :

Make WISKA Hoppmann & Mulsow Gmbh., Germany

Searchlight type                                             : Type SW400 / 1000 CP, Stainless Steel

Day Signalling Search Light        : Type HML 35 / 24

HNA Switch                                                       : Type 1133 / 2 / P, Brass

ATEX Switch                                                      : Type Ex. – 14105 / 2

HNA Socket                                                      : Type 1141 / 2, Brass

SCHUKO Socket                                               : Type 8709.AGC.24.M.64-Z12

Cover with Socket Interior                         : Type DK503

HNA Socket with Switch                              : Type 1144 / 2 / 4, Brass

HNA Plug                                                           : Type 1142 / Ms, Brass

 

Electrical Lighting Luminaries & Accosiated Accessories :

Make AQUA SIGNAL, Germany.

Watertight Multipurpose Luminaire     : 2X18 W, Tandem

Ceiling Luminaire                                                          : 1x60 W, Recessed       

Watertight Multipurpose Luminaire     : 2X18 W, Tandem, S.S. Housing

Mirror Luminaire                                                            : 1x15 W, Surface, with On/off-switch

Cornice Luminaire                                                         : 1x15 W, Surface, Tandem

Berth Light with Adjustable Reflec.       : 1x40 W. Max

Wall Luminaire                                                               : 1x60 W, Brass

Coldroom Luminaire                                    : 2x40 W, Surface

Tube Fluorescent                                                           : 40 W, 590 mm

Ceiling Light                                                                     : 2x20 W, Tandem, Recessed-Surface

Ceiling Luminaire                                                          : 2x18 W, Tandem, Recessed, S.S. Housing

Downlight                                                                          : 100 W. max, Reflector, Fascia Silver

EEx. E Luminaire                                                             : 2x18 / 20 W, Surface

Ceiling Luminaire                                                          : 2x18 W, Surface

Reading / Chart Table Light                       : -

Flood Light                                                                        : 1x400 W,

Ball-U                                                                                  : 1x400 W,

HPS Lamp                                                                          : 1x400 W,

Flood Light for HPS or MH-Lamps                            : 2x400 W,

Flood Light                                                                        : 1x500 W,

W/T Multipurpose Luminaire                   : 2x18 W, Tandem, Surface

70 M                                                                                     : Masthead, 220 V

70 M                                                                                     : Stern, 200 V

70 M                                                                                     : Starboard, 220 V

70 M                                                                                     : Port, 220 V

70 M                                                                                     : Manoeuvre, 230 V

Stern Yellow                                                                     : -

70                                                                                          : Masthead, 220 V

70 A / R                                                                               : Red, 220 V

Steering Light                                                  : Blue, 220 V

Signal Light                                                                       : Red, 230 V

Signal Light                                                                       : White, 230 V

Signal Light                                                                       : Green, 230 V

 

8- AUXILIARIES SUPPLIED BY “PEGU” TURKEY

 

PE-GÜ Mümesillik Ltd. Şti., Türkiye

Küçüktur Yolu Sokak No.6 D.2

TR-34841 Küçükyalı – Istanbul - Türkiye

Tel.        : 90 216 518 18 18

Faks       : 90 216 489 59 41

E.mail   : info@pe-gu.com

 

■ BIP INDUSTRIES CO., LTD.

■ Overseas Sales Team / Project Manager

■ Office : +82 51 519 2245

■ Fax : +82 51 582 7171

■ www.bn-korea.com

 

Fire Retardent Panels, Doors, Floating Floors and Wet Units :

BIP INDUSTRIES CO., LTD. KOREA

B-0 (Wall), B-0 Stainless Steel (Wall), B-15 (Wall), B-15 Stainless Steel (Wall), B-0 (Ceiling) B-0 Stainless Steel (Ceiling),  A-60 Floating Floor, Steel-Galvanized Profiles, Stainless-Steel Profiles,

B-15 Door, B-15 WC Door, A-15 Door, A-30 Door, Stainless Steel Door for Bridge,

Complete set of wet units ( Lavatory, Closets, Shower Set ),                   

 

9- AUXILIARIES SUPPLIED BY “UNTEL” ISTANBUL - TURKEY

UNTEL KABLOLARI Sanayi ve Ticaret A.Ş., Türkiye

Dr. Fazıl Küçük Cad. Üntel Sk. No.26

TR-34768 Ümraniye – Istanbul - Türkiye

Tel.        : 90 216 634 25 77

Faks       : 90 216 634 06 77

E.mail   : info@untel.com.tr

 

Marine Electric Cables :

Make UNTEL, Türkiye

Type MGCG & Fire-resistant Type of Cables.                   

                                                                               

10- AUXILIARIES SUPPLIED BY “ALESTA MARINE” ISTANBUL - TURKEY

ALESTA MARIN DENIZ ARACLARI MUHENDISLIK MUMESSILLIK LTD. STI

ZAMBAK SOK. NO:10 34940 TUZLA

TEL         : +902164468903

FAX        : +902164468906

E.mail   : ertan@alestamarine.com

Web      : www.aletamarine.com

 

Oil Discharge Monitoring Equipment :

Make Optec International

Type                                                                     : CLEANTRACK 1000 , Oilcon Discharge Monitor              

 

Nitrojen Generator:

Make etech

Membrane separation of gaseous Nitrogen from Atmosphere

Design Ambient Temp                                 :40 deg C

Feed Air Supply Type                                   :Screw comp.

Product Flowrate                                                           :1250 m3/h

Product Purity (Vol % O2)                                          : < 5

Delivery Pressure                                                          :1000 kPaG

 

11- AUXILIARIES SUPPLIED BY “SANDVIK” ISTANBUL - TURKEY

SANDVIK ENDÜSTRİYEL MAMÜLLER SANAYİ ve TİCARET A.a., Türkiye

Mermer Sokak No.18, Yakacık E5 Yanyolu

TR-34876 Kartal – Istanbul - Türkiye

Tel.        : 90 216 453 07 65

Faks       : 90 216 453 07 06

E.mail   : sencer.oznam@sandvik.com

 

Shipboard Use Stainless Steel Pipings :

Make SANDVIK  Stockholm, Sweden

Type 316L / 1.4404         

 

Shipboard Use Fwd. Transverse Thruster Unit :

BERG PROPULSION INTERNATIONAL PTE LTD

Make BERG Propulsion

Type                                                                    : BTT 211, 200kW

 

12- AUXILIARIES SUPPLIED BY “YEKE” ISTANBUL - TURKEY

YEKE DENIZCILIK A.Ş., Türkiye

Rauf Orbay Cad. No.111/A

TR-81700 Tuzla – Istanbul - Türkiye

Tel.        : 90 216 446 19 38

Faks       : 90 216 446 19 39

E.mail   : info@yekedenizcilik.com.tr

 

Shipboard Anchoring and Mooring Equipments :

Make KATRADIS,Greece

Chain Cable Grade                         : Q-3, dia.50 mm.

Joining Shackles                                             : Kenter type

Swivel Assembly                                            : End link-Enlarged Link-Swivel-Enlarged Link-Common Link

Anchor Shackles                                             : D type Shackle

 

Shipboard Anchoring and Mooring Equipments :

Dazu Xınge Marine Casting CO,LTD

Bower Anchor                                  : 3050 Kg.

Material                                                             : ZG200-400

 

13- AUXILIARIES SUPPLIED BY “HEINEN HOPMAN” ISTANBUL - TURKEY

HEINEN HOPMAN MÜHENDİSLİK A.Ş., Türkiye

Sahilyolu Caddesi No.45 Güzelyalı

Pendik – Istanbul - Türkiye

Tel.        : 90 216 493 81 18

Faks       : 90 216 392 49 90

E.mail   : info@tr.heinenhopman.com

 

Ventilation &  Air Conditioning Equipment :

Make HEINEN HOPMAN, Netherland

Air Conditioning Plant Serving Accommodation spaces and Wheel House ,

Compact Air Conditioning Equipment Serving Engine Control Room,

Mechanical Supply Fans for Engine Room and Emergency Generator Room,

Exhaust Ventilation Fans for Various Compartments,

Exhaust Ventilation Fan for Pump Room,

Tank Drying Fan Serving Cargo Spaces,

14- AUXILIARIES SUPPLIED BY “MÜGESAN” ISTANBUL - TURKEY

MÜGESAN Mühendislik ve Gemi Sanayii A.Ş., Türkiye

Bağdat Caddesi Irfanbey Apt. No.216/23, Çiftehavuzlar

TR-34726 Kadıköy – İstanbul - Türkiye

Tel.        : 90 216 411 54 66

Faks       : 90 216 386 42 48

E.mail   : info@mugesan.com

 

Main Engine Foundation & Stern Tube Bush Alignment :

Make Philadelphia Resins, USA

 Type                                                                   : Chockfast ORANGE

 

15- AUXILIARIES SUPPLIED BY “ELEKTRODENİZ” ISTANBUL - TURKEY

ELEKTRO-DENİZ (EDEL) Gemi Elektronik Ith. Ihr. Mum. Tic. ve San. Ltd. Şti., Türkiye

Tersaneler Bölgesi G-50 Sk. Gem-Dok San. Sitesi No.17/2

TR- 34940 Tuzla - Istanbul - Türkiye

Tel.        : 90 216 392 77 29

Faks       : 90 216 392 80 18

E.mail   : edel@elektrodeniz.com

 

Shipboard Navigational Equipment :

Radar                                                   : KELVIN HUGHES MANTA DIGITAL 2000A/1/6U X BAND RADAR

Radar                                                   : KELVIN HUGHES MANTA DIGITAL 2000A/3/6U S BAND RADAR

Gps & Dgps                                        : KELVIN HUGES

Gyro Compass                  : KELVIN HUGHES CMZ700

Magnetic Compass                        : KELVIN HUGHES OCEAN

Speed Log                                          : KELVIN HUGHES EML500

Rudder Angle Indicator               : KELVIN HUGHES

Ecdis                                                    : KELVIN HUGHES MANTA DIGITAL 2000

Weather Fax                                     : Furuno Fax30

Portable VHF                                    : ENTEL UK HT840 Ex-Proof

Echo Sounder                   : SKIPPER CDS 102 SYSTEM

GMDSS Console Area A3             : SAILOR

VHF DCS Sets                                    : SAILOR, DSC RT5022

SSB DSC                                               : SAILOR 250W, SSB DSC COMPLETE SET

SSAS                                                     : SAILOR INMARST-C Combined

Portable VHF sets                          : SAILOR GMDSS PORTABLE  VHF SETS

EPIRB & SART                                    : SAILOR

NAVTEX                                              : FURUNO NAVTEX NX7000A

AIS                                                        : KELVIN HUGHES NIS 2002

Telephone                                        : ZENITEL, Batteryles

Sound Reception System            : ZENITEL                            

Telephone Exchange    : EDEL

Talk-Back System                           : EDEL                                  

General Announce/Music          : EDEL

                              

16- AUXILIARIES SUPPLIED BY “TANMARIN” ISTANBUL - TURKEY

TANMARINE Denizcilik ve Ticaret Şti., Türkiye

Hasanpaşa, Fahrettin Kerim Gökay Caddesi Baycan Han  No:39/43,  K.2,   D.10  

TR- 34722 Kadıköy - Istanbul - Türkiye

Tel.        : 90 90 216 414 31 47 

Faks       : 90 216 414 3149216 392 80 18

E.mail   : tanmarine@tnn.net

 

Cargo Tanks Closed Gauge System :

Make TANKTECH, Korea       

 

Portable Oil / Water Interface Detector :

Type                                                                    : T2000-TFC-02,

Design                                                 : Gas Tight, Intrinsically safe, 15 m.

 

Portable Cargo Liquid Sampler :

Type                                                                    : T2000-TSS-01,

Design                                                 : Self drainable, 15 m.

Capacity                                                             : 0.5 lt per charge

 

Deck Shut-off Ball Valves :

Type                                                                    : TVC-02, stainless steel

Size                                                                      : 2 inches

 

Cargo Tank Pressure / Vacuum Relief Valves :

Make UNITECH Co., Ltd., Korea

 

High Velocity Vent & Vacuum Relief Valve :

Type                                                                    : Super-ISO & Vac-ISO

 

17- AUXILIARIES SUPPLIED BY “DELMAR” ISTANBUL - TURKEY

DELMAR Marine Ltd., Türkiye

Güzelyalı Sahilyolu Cad. Yakut Sk. No.2  D.12

Pendik – İstanbul - Türkiye

Tel.        : 90 216 392 21 92

Faks       : 90 216 392 16 20

E.mail   : info@delmar-marine.com

 

Shipboard Life Saving Appliances :

Make STROMME, Norway

Free-Fall Life Boat :

Type                                                                    : Nor-Mar Free-Fall 4.9 T

Material                                                             : GRP Fire Protected, totally enclosed

Capacity                                                             : 19 persons

Rescue Boat :

Type                                                                    : Nor-Mar Rescue 525

Material                                                             : GRP

Capacity                                                             : 6 persons

Engine                                                 : Inboard,

 

18- MATERIALS SUPPLIED BY “HAMZA ERTAŞ” ISTANBUL - TURKEY

HAMZA ERTAŞ Metal Sanayii ve Tic. Ltd. Şti., Türkiye

Aydıntepe Mahallesi Aydınlı Yolu Caddesi Küçük Oto Sanayi Sitesi Önü

Hamza Ertaş İş Merkezi

Tuzla – İstanbul - Türkiye

Tel.        : 90 216 392 38 57

Faks       : 90 216 494 04 29

 

Hull Construction Material (Plates) :

Make ILYICH  Iron and Steel Works,  Ukraine

Type                                                                    : Various dimensions,

Grade                                                                  : ABS Grade A ( 7, 8, 9, 10, 12, 14, 16, 21, 40)

Hull Construction Material (Profiles) :

Make ÖZKAN Demir Çelik Sanayii A.Ş., Türkiye

Type                                                                    : Bulb Profile, Angle Bar

Grade                                                                  : B.V. Grade A , Grade AH36

 

19- MATERIALS SUPPLIED BY “HEMPEL” ISTANBUL - TURKEY

Hempel Coatings San. ve Tic. Ltd. Şti., Türkiye

İçmeler Yılmaz Sokak Köse İş Merkezi No.2 K.3

TR-34947 Tuzla – Istanbul – Türkiye

Tel.        : 90 216 585 10 10

Faks       : 90 216 585 10 11

E.mail   : hempel.tr@tr.hempel.com

 

Ship Hull & Machinery Protective Coatings :

Location              : Flat Bottom

Type                     : Hempadur Multi-Strength, Hempadur, Hempasil X3  8750

Location              : Vertical Bottom & Boottop

Type                     : Hempadur Multi-Strength, Hempadur, Hempasil X3  8750

Location              : Top Side

Type                     : Hempadur Multi-Strength, Hempathane Topcoat

Location              : Ballast Tanks

Type                     : Hempadur

Location              : Fresh Water Tank

Type                     : Hempadur Multi Strength

Locaation            : Sewage Tanks, Engine Room Bilge

Type                     : Hempadur

Location              : Void Spaces

Type                     : Hempadur

Location              : Exterior Side of Accommodation Spaces

Type                     : Hempadur, Hempathane Top Coat

Location              : Interıors

Type                     : Hempadur, Hempalin Enamel,

Location              : Main deck, Forecatle Deck

Type                     : Hempadur Multi-Strength

Location              : Interiors, Engine Room Decks

Type                     : Hempadur, Hempalin Deck Paint

Location              : Interiors, Engine Room Walls & Ceilings

Type                     : Hempadur, Hempalin Enamel

Location              : Internal Decks

Type                     : Hempadur, Hempalin Deckpaints

Location              : Behind Linings

Type                     : Hempadur

Location              : Cargo Tanks

Type                     : Marineline

 

20- MATERIALS SUPPLIED BY “POLİMAR” ISTANBUL - TURKEY

Polimar Denizcilik Mühendislik Ltd. Şti., Türkiye

Evliya Çelebi Mahallesi İstasyon Caddesi

Giptaş Sanayi Sitesi F Blok No.26

Tuzla – Istanbul – Türkiye

Tel.        : 90 216 446 60 88

Faks       : 90 216 446 60 86

E.mail   : elpoli@superonline.com

 

Shipboard use Fixed CO2 Arrangements :         

Make Milmet,

CO2-CYLINDER 67l/45kg cpl. with cylinder valve IPV 190 standard, siphon tube and protecting cover, 2l/1,3kg cpl. with cylinder valve, and protecting cover,

CO2 - Recoil Cap

Make Local,

Release Station equipped with 1xPilot cylinder 2l/1,3kg, 2xPilot valve DN4, 2xDoor limit switch

Make Manulli,

CO2-high pressure hose, W21,8x3/4x375

3/16" Pilot hose

CO2-pilot hose

Make Rotelmann,

Ball valve DN20, G3/4"

Ball valve DN50

Shore connection valve DN20

Ball Valve DN20, G3/4"

Make European,

Audible alarm B/SE 24, red, 24V DC

Limit switch

Make GW,

Waterspray-nozzle RD ½

 

Shipboard Use Fixed Foam Arrangement :

Make Skum,

Foam Monitor,

Branch Pipe

Proportioner

Make Foam Tec,

Multi Purpose (Alcohol Resist) Foam 3%

Make Grundfos,

Foam Liquid Pump 4.5 cub.m./h at 11 bar, stainless steel